Download Guide

How to flash Blackberry phone?

Tools we needed:

• Computer
• Blackberry desktop manager software
• Usb cable
• Firmware

Instruction:

• First download all we needed file BLACKBERRY DESKTOP MANAGER and FIRMWARE
• After you download all files lets start the tutorial install the blackberry desktop manager to your pc
• After you install the desktop manager then install the firmware that you've download
• Now go to Local disk C:/Program files/Common files/Research in motion/AppLoader

Note:
Before you open the Loader application you must have to delete the "vendor" file to flash your BB with out error.
Screenshot:

•  After delete the "Vendor" open the loader and follow the instruction

Screenshot:

• After this set up now check the box you want to install in your BB phone and if you don't want to many apps. into your mobile just hit the next button and hit finish and the phone is now in the download mode do not disconnect the phone until it's not finish just wait to finish the program and your phone is now done to flash

Screenshot:

wait until finish is appear on the screen of your pc and it's done

See you again next time to my another mobile phone repair tutorial...

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Samsung Galaxy Core 2 Stock ROM

• Tap or Type *#1234#
• Go to Setting - About Phone - see Baseband version

Check UAE Visa status online | Verify Dubai Visa online

Tutorial – Flashing your Motorola mobile

In this tutorial I’ll teach how to flash your mobile.

Before you download any firmware or bootloader from somewhere, make sure they are compatible with your mobile, as if you install the wrong will brick your phone. Also make sure to have the battery fully charged before continue.

Also remember that flashing your mobile breaks the Motorola Contract and you will lose your warranty, so any future problems that may occur will be charged by the maintenance guys.

Remember to fully charge the battery of your mobile before making any changes and make a backup (pictures, music, everything you can), because they usually are deleted during the flash proccess, specially if they aren’t in a memory card. Flashing bootloaders usually won’t delete any data, but its advisable to backup it.

Let’s begin the tutorial:

First you need to download RSD Lite. I recommend using RSD Lite V. 4.2. After installing RSD Lite, install the lastest USB drivers available: http://developer.motorola.com/docstools/USB_Drivers/, if you do not want to register in this site, you can download ‘em here:

Windows 32 Bits: http://adf.ly/5724890/http://www.mediafire.com/?g5wmmyymggx

Windows 64 bits: http://adf.ly/5724890/http://www.mediafire.com/?ztudkdm2hnd

• After installing the lastest USB drivers available, restart your computer.
• Go to Menu > Settings > Connections > USB Settings > Modem, then connect your mobile in your computer using the usb cable. And open RSD Lite.
• It should reconize your mobile just as the image below:

• Click in the “…” button, select the firmware or bootloader you want to install on your mobile. Before flashing make sure its compatible with your phone model. For example: V8 512 MB firmwares aren’t compatible with V8 2GB firmwares neither Luxury nor V9, so if they are made to V8 512 MB its JUST to V8 512 MB and should not be installed in any other mobile as it will brick it.

 

• Then click in the Start button.
• Do not remove and avoid use the computer during the flash proccess. Do not unplug the usb cable and do not turn off your computer, cuz if you do that will brich your mobile. After you click in the start button will appear a progress bar showing the percent of what has been done already. Your phone will restart after completing the proccess, but you should not disconnect it from the computer ‘til the message “PASS” appear, as the image below:

If you followed all those steps your mobile should have the new firmware/bootloader/linuxmod/whatever. Have fun ;).

this tutorial is credit to razr2v8english.blogspot.com

see you again next time for more tutorial for mobile phone software....

This tutorial will show you how to upgrade your iPhone 4 to 4.1 without upgrading its baseband using TinyUmbrella. We recommend reading the TinyUmbrella Read Me Located here before doing anything. The Mac version of this tutorial is here.

Please Note: This ONLY Works with the iPhone 4! 

• Step One

Download TinyUmbrella from here Also make sure to download the iPhone 4 4.1 Firmware Located Here

   

• Step Two

Right Click the TinyUmbrella exe (umbrella-4.1.6.exe) and Choose Run as administrator from the contextual popup menu.

If you get a Windows Security Alert, make sure both boxes are checked, and hit Allow Access

• Step Three

Make sure the device is connected, and Umbrella has detected the type of device and its firmware.

• Step Four

Make sure Cydia or TinyUmbrella has an SHSH of the latest firmware. You can do this by simply clicking Save my SHSH. If you have problems saving the SHSH follow this tutorial here first.

Hit Start TSS Server and make sure you receive no errors.


Once The TSS Server is "running" successfully, umbrella will kill iTunes. Leave TinyUmbrella Open.

If you do receive an error, DO NOT continue. Your restore will not work if the TSS server cannot be started.

• Step Five

Open iTunes and Hit Shift+ Restore.

Browse to and select the iPhone 4.1 Firmware File.

Hit ok to Restore iPhone

• Step Six

iTunes should give you error 1004.
This is what we wanted, as it notes the baseband has not updated :)

• Step Seven

Go back to the TinyUmbrella window and Click Kick Device Out of Recovery
If you have issues here, try closing and re-opening TinyUmbrella.

Your iPhone will now be on 4.1 with the 1.59.00 baseband! (Which means you can now unlock using this tutorial)

**Thanks to semaphore for his work on this tool and this tutorial credit goes to iClarified

see you again next time to my gsm mobile software tutorial....