Wednesday, October 5, 2016

Update Samsung Galaxy Note 2 To Official Android 4.3 Jelly Bean N7100XXUEMI6 Firmware

Update Samsung Galaxy Note 2 To Official Android 4.3 Jelly Bean N7100XXUEMI6 Firmware
A few weeks ago, we were notified that android 4.3 jelly bean would come to the Note 2 in mid November. Well, it is now early October and we are now getting the official update!This tutorial will show you how to get the official final version of android 4.3 jelly bean on the samsung galaxy note 2 n7100. This is only compatible with the galaxy note 2 n7100 and not any other version of the samsung galaxy note 2. What also make this update special is that you will get all the new android 4.3 features found on the Note 3, and Samsung Galaxy S4.
We know that lot of Android 4.3 Jelly Bean test firmwares were leaked for the Samsung Galaxy Note 2. Here is an official build that is available for download to flash into your Galaxy Note 2 via Odin.
How To Get Official Android 4.3 On Note 2 N7100
This Android 4.3 Jelly Bean  N7100XXUEMI6
is only compatible Galaxy Note 2 N7100 and not is for Sprint, Verizon, AT&T, T-Mobile or others.
Your Galaxy Note 2 must running Original ROM and not a custom ROM. If your Note 2 is running Custom Rom, download and flash original ROM into your Note 2.
Create a backup of your phone in clockworkmod recovery to external storage. Battery power at least 90% full.
Download N7100XXUEMI6
(zip file) then unzip this file to your PC. Now you will get AP_N7100XXUEM16_CP_N7100XXEM16_CSC_N7100XAEM16_BY_WVAZ_DINK.zip
Step 1: Set your phones into USB debugging mode: Settings -> Applications -> Development -> USB debugging.Then turn off your phones.
Step 2: Put your galaxy s3 into download mode by pressing and holding VolumeDown + Home + Power simultaneously.
Step 3: Download Odin and start ODIN on PC.
Step 4: Connect the device to your computer using USB.
Step 5: Wait a few seconds, the ODIN screen will show that a device is now connected
- If ODIN not detect your device, then install drivers here and then put your device into download mode. Odin will detect your device when it says COM2

etc.
Step 6: Click the PDA button, then select AP_N7100XXUEM16_CP_N7100XXEM16_CSC_N7100XAEM16_BY_WVAZ_DINK.tar
Step 7: Press “Start”. ODIN will start flash the firmware.
Step 8: After Flash complete, your Galaxy S3 will Boot into Android System Recovery Mode.
Now you need:
For Usb Drivers Install Samsung Kies
Odin
Jelly Bean Firmware
Now your Note 2 is running the official Android 4.3 Jelly Bean on your samsung galaxy note 2 firmware. Update Samsung Galaxy Note 2 To Official Android 4.3 Jelly Bean N7100XXUEMI6